Search results for "Damage mechanics"

Quasi-static behaviour and damage assessment of flax/epoxy composites

2015

Experimental investigations were conducted on flax and E-glass fibres reinforced epoxy matrix composites subjected to quasi-static loadings. Flax/epoxy samples having [0]12, [90]12, [0/90]3S and [±45]3S stacking sequences, with a fibre volume fraction of 43% have been tested under tension, compression and in-plane shear loadings. Overall, the compression strength of glass/epoxy was 76% greater than for the flax/epoxy composite. The damage evolution of flax/epoxy of [0/90]3S and [±45]3S samples has been evaluated in terms of transverse crack densities with respect to the load increment. The crack density exhibited a classical “S” shaped pattern for [0/90]3S and linearly for [±45]3S specimens…

Towards a local approach to fatigue, for the calculation of structures, applied to continuous fibre reinforced composite materials and structures

2018

The original concept of mechanical fatigue was linked to the failure of structures and was treated at first within the framework of Fracture Mechanics. Models developed to explain this phenomenon must therefore be able to be applied to structures: changing the structure means changes to the model and its identification. It is therefore judicious to develop models capable of treating both the damage processes and also able to be used within a local framework: to this end a method based on Damage Mechanics seems appropriate. This approach has long been employed and requires only the identification of damage processes at the level of the RVE (Representative Volume Element) to be used for any s…

Fracture resistance and the mode of failure produced in metal-free crowns cemented onto zirconia abutments in dental implants.

2019

The purpose of the investigation was to analyze fracture resistance and mode of failure of zirconium oxide (zirconia) abutments placed on dental implants bearing crowns of different esthetic materials: zirconia, lithium disilicate (LDS), and nano-ceramic resin, for replacing single teeth in the anterior sector. Eighty implant-abutment-crown units were divided into four groups: Group T-MC (control): 20 metal-ceramic crowns cemented onto titanium abutments; Group Z-Z: 20 zirconia crowns on zirconia abutments; Group Z-LD: 20 lithium disilicate crowns on zirconia abutments; and Group Z-NCR: 20 nano-ceramic resin crowns on zirconia abutments. Specimens underwent a fatiguing process (dynamic load…

Prediction of Ductile Fractures Occurrence in Deep Drawing of Square Boxes

1996

Abstract The authors propose a new approach for the prediction of tearing in the deep drawing process of square boxes. Such an approach is based on a damage mechanics formulation and in particular on the yield condition for damaging materials proposed by Tvergaard and Needleman and on a strain controlled nucleation model. The flow rule associated to the yield condition is introduced in a finite element explicit formulation founded on the solution of the dynamic equilibrium equation and on an explicit time integration scheme. By this way the developed model allows to calculate the void volume fraction value during the deep drawing process of square boxes and consequently to predict the insur…

Interlaminar decohesion and inner-layer damage in composite structures

2008

A hybrid virtual–boundary element formulation for heterogeneous materials

2021

Abstract In this work, a hybrid formulation based on the conjoined use of the recently developed Virtual Element Method (VEM) and the Boundary Element Method (BEM) is proposed for the effective computational analysis of multi-region domains, representative of heterogeneous materials. VEM has been recently developed as a generalisation of the Finite Element Method (FEM) and it allows the straightforward employment of elements of general polygonal shape, maintaining a high level of accuracy. For its inherent features, it allows the use of meshes of general topology, including non-convex elements. On the other hand, BEM is an effective technique for the numerical solution of sets of boundary i…

Numerical simulation of fatigue-driven delamination using interface elements

2005

This paper presents a computational technique for the prediction of fatigue-driven delamination growth in composite materials. The interface element, which has been extensively applied to predict delamination growth due to static loading, has been modified to incorporate the effects of cyclic loading. Using a damage mechanics formulation, the constitutive law for the interface element has been extended by incorporating a modified version of a continuum fatigue damage model. The paper presents details of the fatigue degradation strategy and examples of the predicted fatigue delamination growth in mode I, mode II and mixed mode I/II are presented to demonstrate that the numerical model mimics…

Enhancing formability of aluminium alloys by superimposing hydrostatic pressure

2003

Publisher Summary One of the strategic topics in manufacturing engineering is represented by the reduction of components weight. This aim is pursued by utilizing accurate and effective design tools and using lightweight metals such as aluminum, magnesium, and titanium alloys. Unfortunately, such materials often show a poor ductility, and thus enhancing formability is nowadays one of the most relevant research focus, as well as the development of effective and reliable predictive models of defects insurgence during forming processes. In this scenario, forming by means of superimposed hydrostatic pressure represents a promising alternative manufacturing technique. The chapter discusses the si…

Characterization of a fractured basement reservoir using high-resolution 3D seismic and logging datasets: A case study of the Sab'atayn Basin, Yemen.

2018

The Sab'atayn Basin is one of the most prolific Mesozoic hydrocarbon basins located in central Yemen. It has many oil producing fields including the Habban Field with oil occurrences in fractured basement rocks. A comprehensive seismic analysis of fractured basement reservoirs was performed to identify the structural pattern and mechanism of hydrocarbon entrapment and reservoir characteristics. A 3D post-stack time migration seismic cube and logging data of 20 wells were used and several 2D seismic sections were constructed and interpreted. Depth structure maps were generated for the basement reservoir and overlying formations. The top of the basement reservoir is dissected by a set of NW-S…

Jellyfish Stings Trigger Gill Disorders and Increased Mortality in Farmed Sparus aurata (Linnaeus, 1758) in the Mediterranean Sea

2016

11 pages, 4 figures